If You Are Using Exposed Metal roof color

While a metal roof may have a many issues, overall, it’s an incredibly tough, long-continuing result for roofing. The high- performing characteristics metal roofs have nearly always overweigh any disadvantages or implicit issues. Read through the Pros and Cons of Metal Roofing for further information about the benefits and downsides of this material.

 Still, get in touch with our platoon of expert Product Specialists moment, If you ’re interested in learning further about metal roofs. We ’ll work directly with you to help you elect the stylish panel profile, hand, and color/ finish for your specific design. Fill out our Get a Quotation Form to get started.

How to Choose the Right Fastener

 Metal roofing and siding is about further than just the panels you choose. Fasteners, which are the tackle used to secure metal panels to the structure beneath them, are an integral part of any metal operation, and it's important to understand how to choose the right fasteners for your design.

 Before reading any beyond, you can check out our blog, ExposedVs. Concealed Fasteners, to get further about the disputations between the two descriptions, the pros and cons, and which type is used by each panel profile. This blog focuses on how to cherry-pick the precise type of fastener after you ’ve formerly resolved on which panel you ’re copping and the design it'll be used for.

It’s also historic to note that the terms “ fasteners” and “ screws” are used interchangeably throughout this blog. When written, they ’re pertaining to the identical thing.

 3 Questions to Ask Before Choosing Your Fastener

 Does your panel use uncloaked or hid fasteners?

 What's your substrate material?

Are you exploiting our Truten ™ A606 finish?

 Each of these interrogatives have extensively different answers grounded upon your chosen metal panel. Let’s break them down one-by-one.

 Once you ’ve decided that your panels use uncloaked fasteners, you can also start choosing your fasteners grounded on your substrate material, asked finish, and whether your design is for roofing, siding, or trim. Let’s break it down.

 Still, you ’ll be using metal-to-Wood screws, If your substrate iswood.However, you ’ll use pristine sword screws, If you're using the Weathering Steelfinish.However, you ’ll use Galvanized screws that will be painted to match your chosen color, If you're using anything differently. The reason for this difference is because of the “ constituents” in our Truten ™ A606 finish. Pairing Weathering Steel with Galvanized screws would actually lead to galvanic erosion because they've different chemical makeups. The screws would actually end up “ fighting” each other, making them pull down from one another. That’s why you must pair Truten ™ A606 panels with pristine sword fasteners. Metal roofing colors.

 Still, you ’ll be using metal-to- metal screws, If your substrate is metal. The same will remain true for the homestretches (Stainless Steel for A606 and Galvanized for everything differently). The difference between metal-to- metal and metal-to-Wood screws is how they're threaded and the tips. Wood screws are double threaded and have a flute tip, which is made to cut and stick into wood. metal screws are tone-tapping with a really flat thread in order to drill and stick into metal. That’s why the distinction between substrates and the type of screw you use is critical to your metal panel’s performance. White metal roof.

 Once you ’ve narrowed down your substrate and finish, the screw you ’ll need is dependent upon whether your design is for roofing, siding, or trim. Let’s take a look at each individual exposed fastener panel profile, and which screw is most generally used and recommended grounded on the operation. Black metal roof.

 Panel Profile Recommended Fastener-Roofing Recommended Fastener-Siding Recommended Fastener-Trim

Tuff Rib 14-10x1” 14-10x1” 10-15x1.5”- Exposed

 K-Lath 10x1”- Concealed

 Delta Rib 14-10x1” 14-10x1” 10-15x1.5”- Exposed

 K-Lath 10x1”- Concealed

Platte River Not recommended for roofing 14-10x1” 10-15x1”- Exposed

 K-Lath 10x1”- Concealed

 Purlin Bearing Rib 14-10x1” 14-10x1” 10-15x2”- Exposed

 K-Lath 10x1”- Concealed

Valley Rib 14-10x1” 14-10x1” 10-15x2”- Exposed

 K-Lath 10x1”- Concealed

7.2 Structural 14-10x1” 14-10x1” 10-15x2”- Exposed

 K-Lath 10x1”- Concealed

¾” Corrugated 14-10x2” 14-10x1” 10-15x1.5”- Exposed

 K-Lath 10x1”- Concealed

 ¼” Corrugated Not recommended for roofing 14-15x1” 10-15x1”- Exposed

 K-Lath 10x1”- Concealed

½” Corrugated Not recommended for roofing 14-15x1” 10-15x1”- Exposed

 K-Lath 10x1”- Concealed

 ⅞” Corrugated 14-10x2” 14-10x1” 10-15x2”- Exposed

 K-Lath 10x1”- Concealed

It’s important to note that each of these screws are simply a recommendation grounded off of our most generally used screws with that specific panel. Your design will always have its own unique set of requirements, which could affect the fastener you need. Always consult a Product Specialist before copping your fasteners in order to save time and avoid copping the wrong effects. Blue metal roof.

 If You Are Using Concealed Fasteners.

 Once you ’ve determined that you ’re using metal panels with a concealed fastener system, you ’ll need to answer the same two questions what’s your substrate material and are you using the Truten ™ A606 finish on your panels.

 Again, if your substrate is wood, you’ll need metal-to-Wood screws to complete your project. However, you’ll need metal-to-metal screws to complete installation, If your substrate is metal. The logic behind the different material screws also remains true for concealed fastener systems (the two are veritably different in their threading and tips in order to cut and stick into the separate material).

The same remains true about choosing galvanized metal or pristine sword for yourfasteners.However, you ’ll need pristine sword screws in order to avoid galvanic erosion, which pushes Truten ™ A606 panels down from galvanized screws, If you ’re finishing your panels with RidingSteel.However, galvanized screws are the correct fastener to use, If you ’re finishing your panels with anything different.

 Once you ’ve determined the substrate material and finish of your fasteners for your concealed fastener panels, the screws you ’ll need depend on whether or not your panels use a clip system. Concealed fastener panels can either be cropped-to- sundeck or direct-to- sundeck, meaning they use a clip system or do not. This difference affects which kind of fasteners you ’ll probably be using. Then’s a map with general recommendations grounded on our most generally used screws for each concealed fastener panel.